ARCHITECTURAL SERVICES

Give us a call today!

O: (212) 828 8189 Cell: (347) 399 7991

NEW CONSTRUCTION

.

ADDITIONS

.

ALL TYPE OF PERMITS

.

ALTERATION TYPE I

An Alteration Type-I application is required when there is a major change to the Certificate of Occupancy of a building. Most commonly, an Alteration Type-I Application will be used to change the Maximum Number of Persons for space, to change the Occupancy or Use Group of a space, and/or to change the Description of a space. For more information, you can contact us

ALTERATION TYPE II

An Alteration Type-II application is an alteration that doesn’t change the use or occupancy of the building but requires several types of work. An Alteration Type-II Application may be used when there is no change to the Certificate of Occupancy due to the proposed alterations. When an Alteration Type-II is filed under Directive-14, the Applicant or other NYS Registered Professional Engineer or Registered Architect may sign off the application with a Directive-14 Final Inspection. For more information, you can contact us

ALTERATION TYPE III

An Alteration Type-III application is a minor alteration that involves only one type of work. For more information, you can contact us

BACKFLOW PREVENTION DEVICE (RPZ)

(Reduced Pressure Zone Backflow Prevention Device) a device containing two independently acting check valves on both sides of an automatically operated pressure differential relief valve, all located between two resilient seated shutoff valves. Acceptable devices must be listed by the New York State Department of Health. For more information, you can contact us

COURT APPEARANCES

.

DOUBLE CHECK VALVE (DCV)

Device with two single, independently acting check valves, including tightly closing shutoff valves located at each end of the assembly and suitable connections for testing the water tightness of each check valve, and listed by the New York State Department of Health. For more information, you can contact us

ENLARGEMENTS

.

FILINGS

.

PORCH & DECKS

.

POST APPROVAL AMENDMENTS (PAA)

.

SIGN-OFF

.

VIOLATION CERTIFICATION

.

3-D RENDERING

.